JNU | RTI | Directory | Contact Us | Emergency Services | List of Holidays
A- A A+

Sangmesh

Sangmesh
Sangmesh
Associate Professor
Centre/School/Special Centre
School of Engineering
Email
sangmesh[at]mail[dot]jnu[dot]ac[dot]in
Personal Webpage
https://jnu.ac.in
Qualifications

BE in Mechanical Engineering 
M.Tech in Energy Engineering 
Ph.D in Mechanical Engineering Sciences

Areas of Interest/Specialization

Materials, Heat Transfer, Green Building Materials, Bio Composites, Energy management  

Experience

Associate Professor, School of Engineering, Jawaharlal Nehru University ( 14.07.2023 - Present)
Assistant Professor, Green Energy Technologies, Madanjeet School of Green Energy Technologies, Pondicherry University 
Associate Professor, BMS Institute of Technology and Management, Bangalore
Assistant Professor, BMS Institute of Technology & Management, Bangalore 
Assistant Professor, CIIRC, Jyothy Institute of Technology, Bangalore
Assistant Professor, School of Engineering and Technology, Jain University, Bangalore 

Awards & Honours

-

International Collaboration/Consultancy
  • IKS Division, Ministry of Education, Govt. of India
  • Farmers Producer Company supported by Watershed Department, Govt. of Karnataka
  • VGST, Department of Science and Technology, Govt. of Karnataka
  • Karnataka State Council for Science and Technology
  • Atal Innovation Mission,  NITI AAYOG Govt. Of India
  • PMKVY
  • NSTEDB, DST, Govt. of India
  • Altem Technologies
Best Peer Reviewed Publications

Publications (Journals -15, Book Chapter - 06 and Conference – 04) - 25

Journals: 

  1. Karthik Selva Kumar Karuppasamy, Brintha Ramachandran, Aruna Devi Karuppasamy, Balaji P․S․, Krishna Kumar Jaiswal, Sangmesh B, Sustainable passive vibration control of fuel cells on fluid structure interaction, Forces in Mechanics, Volume 19, 2025, 100316, ISSN 2666-3597, https://doi.org/10.1016/j.finmec.2025.100316.

  2. Kumar KK, Srinivasnaik M, Ramavath G, Sangmesh, Kumar A. Microstructure characteristics and crystallographic orientation in dissimilar friction stir welding. Proceedings of the Institution of Mechanical Engineers, Part L. 2025;0(0). doi:10.1177/14644207251315873 

  3. Gowrishankar TP, Sangmesh B, Role of heat treatment on mechanical and wear characteristics of Al-TiC composites, Materials Physics and Mechanics, 2024;52(1):108-117. http://dx.doi.org/10.18149/MPM.5212024_10 

  4. Sangmesh B, Nagraj Patil, Krishna Kumar Jaiswal, T.P., K. Karthik Selvakumar, M.S. Jyothi, R. Jyothilakshmi, Santosh Kumar, Development of sustainable alternative materials for the construction of green buildings using agricultural residues: A review, Construction and Building Materials, Volume 368, 2023, 130457, https://doi.org/10.1016/j.conbuildmat.2023.130457. IF: 7.693

  5. Krishna Kumar Jaiswal, Chandrama Roy Chowdhury, Deepti Yadav, Ravikant Verma, Swapnamoy Dutta, Km Smriti Jaiswal, Sangmesh B, Karthik Selva Kumar Karuppasamy, Renewable and sustainable clean energy development and impact on social, economic, and environmental health, Energy Nexus, Volume 7, 2022, 100118, ISSN 2772-4271, https://doi.org/10.1016/j.nexus.2022.100118.

  6. Sangmesh, Gopalakrishna Keshava Narayana, Sudhakar Kumarasamy, Mahendran Samykano, Gowrishankar Thyagatur Panchaksharaiah & Nagraj Patil, Numerical investigation on heat sink with fluid pockets for high power LEDs, Indian Journal of Engineering & Materials Sciences, Vol. 27, October 2020, pp. 1018-1026. Indexed in Scopus

  7. Gowrishankar T P, Manjunatha L H and Sangmesh B, Heat treatment and its effect on mechanical and wear, Materials Research Innovations, International Journal of Microstructure and Materials Properties, Vol.15 No.4 (2020), pp.316 – 333. DOI: 10.1504/IJMMP.2020.115207, Indexed in Scopus 

  8. Nagraj Patil, Gopalakrishna, Sangmesh B, Performance Evaluation of Cryogenic Treated and Untreated Carbide Inserts during  Machining of AISI 304 Steel, International  Journal of Automotive and Mechanical Engineering Vol. 17 No. 1, (2020),7709-7718. Indexed in Scopus

  9. Gowrishankar T P a, Manjunatha L HB and Sangmesh B, Mechanical and Wear behaviour of Al6061 reinforced with Graphite and TiC Hybrid MMC’s, Materials Research Innovations, Vol. 24:3, (2020), 179-185. https://doi.org/10.1080/14328917.2019.1628497. Indexed in Scopus 

  10. Nagraj Patil, Gopalakrishna, Sangmesh B, Effect of Cryogenic treatment on Tool Wear, Chip Thickness of Uncoated Carbide Insert during Machining with AISI304 Stainless Steel, International Journal of Innovative Technology and Exploring Engineering, Volume-8, Issue-9, July 2019, 2561-2566. Indexed in Scopus

  11. Sangmesh, Gopalakrishna Keshava Narayana, Manjunath Shiraganhalli Honnaiah, Krishna Venkatesh & Keertishekar Mysore Siddalingappa,   Thermal Performance of Heat Sink with Fluid Pockets for High Power Light Emitting Diode, International  Journal of Automotive and Mechanical Engineering, Vol. 14 No. 4, (2017), 4846-4862. Indexed in Scopus

  12. Sangmesh B, Gopalakrishna K, Manjunath S.H., Kathyayini N, K. Kadirgama, M. Samykano, G.C. Vijayakumar,  Experimental Investigation on HSFP using MWCNT based Nanofluids for high power Light Emitting Diodes, Journal of Mechanical Engineering and Sciences, Vol. 12 No. 3, (2018),3852-3865. Indexed in Scopus

  13. Sangmesh B, Gopalakrishna K, Manjunath S H, M Narendra Kumar, Vijay kumar G, Heat Trasnfer Enhancement in a high Power LED using Heat Sink with Fluid Pockets, Journal of Scientific and Industrial Research. Vol. 77 October 2018, 1018-1026.  Indexed in Scopus 

  14. Nagraj Patil, Gopalakrishna, Sangmesh B, K Sudhakar, G C Vijaykumar, Performance studies on cryogenic treated carbide cutting tool for turning of AISI304 steel, Journal of Mechanical Engineering and Sciences, Vol. 12 No. 3, (2018),3927-3941. Indexed in Scopus

  15. Sangmesh, Gopalakrishna K, Krishna Venkatesh, Heat Transfer Analysis of a 7.5W LED Load with Passive and Active cooling for Constant Luminance Applications, Journal of CPRI, 9-4, (2013), 569-578.

Conference:

  1. U. Santhi, W. K. Ngui, M. Samykano, K. Sudhakar, K. Kadirgama, B. Sangmesh and M. Asok Raj Kumar, Cobalt nanowires: Advancing into future nanomaterial, Proceedings of the 3rd International Conference on Automotive Innovation Green Energy Vehicle, AIP Conference Proceedings 2059, 020006 (2019); https://doi.org/10.1063/1.5085949. Indexed in Scopus

  2. F. Benedict, K. Kadirgama, D. Ramasamy, M. M. Noor, M. Asok Raj Kumar, M. M. Rahman, Z. Ghazali, and B. Sangmesh, Thermal management of vehicle radiator by nanocellulose with one-dimensional analysis, AIP Conference Proceedings 2059, 020043 (2019); https://doi.org/10.1063/1.5085986. Indexed in Scopus

  3. F. Benedict, K. Kadirgama, D. Ramasamy, M. M. Noor, M. Samykano, M. M. Rahman, Z. Ghazali, and B. Sangmesh, Nanocellulose as heat transfer liquid in heat exchanger, AIP Conference Proceedings 2059, 020044 (2019); https://doi.org/10.1063/1.5085987. Indexed in Scopus 

  4. Karthik Selva Kumar, Mohammed Jaseel, R Brintha, Aruna Devi, Krishna Kumar Jaiswal, B M Sangmesh, Performance Enhancement of a Vertical Axis Wind Turbine (NACA 25112) Using Deflector Plates as an Augmenter. Advances in Mechanical Engineering and Material Science. ICAMEMS 2023. Lecture Notes in Mechanical Engineering. Springer, Singapore. https://doi.org/10.1007/978-981-99-5613-5_18 

Recent Peer Reviewed Journals/Books

Book Chapters:

  1. Jaiswal, K.K., Chowdhury, C.R., Yadav, D., Dutta, S., Banerjee, I., Jaiswal, K.S., Ramaswamy, A.P., Mrinal, , Sangmesh, B., Jaiswal, A.K., Kumar, V. and Kanny, K. (2024). Eco-Friendly Approaches for Converting Organic Waste to Bioenergy for Sustainable Development. In Applied Biotechnology and Bioinformatics (eds H. Thatoi, S. Mohapatra, S.K. Das and S.K. Pradhan). https://doi.org/10.1002/9781119896869.ch12

  2. Deepika, C., Mrinal, Pohrmen, C.B. et al. Hydrothermal liquefaction of wet microalgal biomass for biofuels and platform chemicals: advances and future prospects. Discov Appl Sci 6, 245 (2024). https://doi.org/10.1007/s42452-024-05911-4

  3. Krishna Kumar Jaiswal, Chandrama Roy Chowdhury, Swapnamoy Dutta, Ishita Banerjee, Km Smriti Jaiswal, H.M.D. Nisansala, B. Sangmesh, N.M.S. Sirimuthu, Chapter 1 - Synthesis of renewable diesel as a substitute for fossil fuels, Editor(s): Dipesh Kumar, Bhaskar Singh, Sanjay Kumar Gupta, Renewable Diesel, Elsevier, 2024, Pages 1-31, ISBN 9780323911535, https://doi.org/10.1016/B978-0-323-91153-5.00001-7.

  4. Sabarish Radoor, Jyothi Mannekote Shivanna, Sangamesh Baswaraj, Chandrama Roy Chowdhury, Aswathy Jayakumar, Jasila Karayil, Jun Tae Kim, Jaewoo Lee, Suchart Siengchin, Lightweight and sustainable materials for food packaging applications,Editor(s): Sanjay Mavinkere Rangappa, Sunita M. Doddamani, Suchart Siengchin, Mrityunjay Doddamani,Lightweight and Sustainable Composite Materials, Woodhead Publishing, 2023, Pages 219-240, ISBN 9780323951890, https://doi.org/10.1016/B978-0-323-95189-0.00010-X. 

  5. Ravikant Verma, Swapamoy Dutta, Arvind Kumar, Tulsi Satyavir Dabodiya, Naveen Kumar, Karthik Selvakumar Karuppasamy, B Sangmesh, Ajeet Jaiswal, Krishna Kumar Jaiswal, Biochar-Based Nanocomposite Materials: Types, Charecterstics, Physical Activation and Diverse Application Scenario, Biochar-Based Nanocomposites for Contaminant Management, Advances in Science; https://doi.org/10.1007/978-3-031-28873-9_1.

  6. Mohammed Junaid Mouda, Dinamani M, Jyothi M. S., Sangmesh B, A brief Discussion on Acute Disseminated Encephalomyelitis (ADEM) andAgencies of the Corpus Callosum (ACC), Bio inspired algorithms and devices for treatment of cognitive diseases using future technologies;DOI: 10.4018/978-1-7998-9534-3.

Patents (if any)

Indian Patent Published (411716-001)
Title - Bio Titanium Solar Powered Isolation Device Harnessing Microorganisms and Solar
Energy for Efficient Tritium Removal from Nuclear Waste water